Uncategorized

ByAdmin Koma

JHA | Job hazard analysis |04 May 2020 |03 June 2020

Instructor: Ir.IJ.Kasdadi, MT.

Bandung | 08 i 20019 | 25 June 2019 |

Course Objectives:

This course is intended to provide knowledge and understanding of the Job Hazard Analysis (JHA). In the early part of this training will be discussed terminologies related JHA such as hazard, risk, incident, and so forth. The discussion will be carried out fully, both procedures, the stages of JSA, as well regarding any hazard hazard-related job and its analysis. To complement the participants’ understanding of the Permit to Work (PTW), several risk assessment methods and examples of JHA / JSA from some companies also will be reviewed in this training. Generally, after this training, the participants are expected to gain knowledge and understanding of JHA thoroughly.

Topics Covered:

  • Introduction to Course
  • Hazard, Safety & Risk Terminologies (safety terminologies, hazard, risk, incident, accident, safety work, etc)
  • The Hierarchy of Controls (Engineering controls, Management controls, Personal Protective Equipment (PPE), etc)
  • Identifying types of hazards (Pressure, Mechanical, Flammability/Fire, Explosives, Electrical Contact, Chemical Reactions, etc)
  • Accident Types (Contact-with, Caught-on, Caught-in, Caught-between, Fall-to-surface, Fall-to-below, etc)
  • Potential Major Accidents in Field (Blowouts, Riser & Pipeline releases, Process Hydrocarbon Releases – Fire & Explosion, Ship Collision, Transportation Accidents, Structural damage, etc)
  • Who Perform JSA/JHA & Why Conduct a JSA?
  • Steps of Job Hazard Analysis (JHA form, Watch the work being done, Describe the hazards in each step of the task, etc)
  • Permit to Work (PTW) System (PTW form, cold work, hot work, confined space entry, formal procedure, etc)
  • Application of JHA in Risk Assessment Program (Risk Assessment Code, Risk Assessment Matrix, etc)
  • Risk Assessment Methods (what if, checklist, Event Tree Analysis / ETA,  Fault Tree Analysis / FTA, etc)
  • JHA practices and JHA examples from some companies
Intended Audience
Job Hazard Analysis (JHA) safety training is designed for construction workers and managers who are responsible for the safety of their job site according to OSHA regulations. We encourage all employees to use this information to analyze their own jobs, to recognize workplace hazards and how to report them.
  • Construction Foremen
  • Construction Supervisors
  • Construction Workers

Features and Benefits

By taking Click Safety’s Job Hazard Analysis online safety course, you will be able to identify common hazards and to conduct an analysis for your workplace. When you have successfully completed this course, you will:
  • Know how to conduct a job hazard analysis
  • Understand the risk assessment code
  • Be prepared to use a job hazard analysis

 

ByAdmin Koma

Safety Instrumented Systems (SIS): ISA, IEC

04 May 2020 |03 June 2020 | 12 August 2020

Image result for Safety Instrumented Systems course objectives"

Most of today’s computer controlled industrial processes involve large amounts of energy and have the potential for devastating accidents. Reliable, well-engineered safety systems are essential for

Protection against destruction and loss of life. This course is an intensive practical and valuable exposure to the most vital, up-to-date information and practical know-how to enable you to participate in hazard studies and specify, design, install and operate the safety and emergency shutdown systems in your plant, using international safety practices. This course will provide you with a broad understanding of the latest safety instrumentation practices and their applications to functional safety in manufacturing and process industries. This course could save your business a fortune in possible downtime and financial loss.

 

The objectives of the course are to:

  • Expand your practical knowledge in the application of safety instrumented systems (SIS) as applied to industrial processes
  • Provide you with the knowledge of the latest standards dealing with each stage o the safety life cycle from the initial evaluation of hazards to the detailed engineering and maintenance of safety instrumented systems
  • Give you the ability to plan hazard and risk assessment studies, then design, implement and maintain the safety systems to ensure high reliability
  • Assist your company to implement functional safety measures to international standards

 

Topics Covered:

Although a basic understanding of electrical engineering principles is essential, even those with a superficial knowledge will substantially benefit by attending this course. In particular, if you work in any of the following areas, you will benefit: Instrumentation and control engineers and technicians, Design, installation and maintenance engineers and technicians in the process industries, Managers and sales professionals employed by end users, Systems integrators or consultants, Consulting electrical engineers, Plant engineers and instrument technicians, Operations technicians, Electrical maintenance technicians and supervisors, Instrumentation and control system engineers, Process control engineers, Mechanical engineers

Contents:

  • Introduction to SIS
  • Definitions, Overview, Standards
  • IEC 61508, IEC 61511 and ISA S84
  • Hazards and Risk Reduction
  • Hazard Studies
  • Layers of Protection Analysis (LOPA)
  • Safety Requirements Specifications
  • Safety Integrity Level (SIL)
  • Technology Choices
  • Conceptual Design
  • Reliability Analysis
  • Safety in Field Instruments and Devices
  • Engineering the Safety Systems Hardware
  • Engineering the Application Software
  • Overall Planning
  • Installation and Commissioning
  • Validation and Operation
  • Management of Change
  • Justification of SIS

Who should attend?

This training is targeted to control, instrumentation and application engineers who will be involved in executing safety instrumented system projects covering any phase of the safety lifecycle from hazard and risk assessment, through engineering and design to operations and maintenance.

Image result for Safety Instrumented Systems course objectives

ByAdmin Koma

Metering System and Custody Transfer for Oil and Gas

Metering System and Custody Transfer for Oil and Gas

12 May 2020 |10 June 2020 |08 July 2020 | 11 August 2020 |

This course is developed for engineers and technicians who need to have a practical knowledge of selection, installation and commissioning of fiscal metering equipment. It is for those primarily involved in achieving effective results in industrial processes. This would involve the design, specification and implementation of control and measurement equipment. The course focuses on practical applications, with special attention to installation considerations and application limitations when selecting or installing different measurement or control instruments for fiscal metering.

Our courses are designed to meet the needs of all levels of personnel and can be tailored to meet specific project or equipment requirements.

COURSE OUTLINE:

1. Introduction to Fiscal and Custody:

2. Basic Fluid Flow

3. Performance Characteristic of Flowmeter

4. Head Flow Meter

5. Calibration of Flow Meters in Air/Gas/Water and Oil Medium

6. Turbin Meter

7. Standard AGA 3 and AGA-7 AGA-9

8. Ultrasonic Flow Meter

9. Coriolis Meter

10. Proving Flow Meter API

11. Calculation Sample

This training course will highlight:

  • Everything that is specific and relevant to flow conditions at the point of measurement
  • Fiscal measuring technologies currently utilized (from differential pressure right through to Coriolis)
  • The operating principle of each technology with respect to performance, properties, uses, application, installation, calibration, advantages and disadvantages, et cetera
  • How to select the best device for the task at hand
  • Understand proving, calibration, maintenance, meter runs and other aspects that go together with fiscal flow measurement

KOMA TRAINING courses cover virtually every technical discipline, learning style and level of competency, from basic awareness through mastery.  Learning what you need to know, at the right depth.

Click here for complete syllabus : metering and custody silabus

ByAdmin Koma

Gas Insulated Switchgear Operation and Maintenance | G I S

19 February 2020 | 18 Mart 2020 | 15 July 2020

Pelatihan ini dimaksudkan untuk meningkatkan pengetahuan dan wawasan secara komprehensif mengenai Gas Insulated Switchgear dalam sistem tenaga Listrik. 
Topik pelatihan ditekankan pada  Operasi, proteksi dan pemeliharaan peralatan, sehingga diperoleh sistem tenaga listrik yang handal.  Pada pelatihan ini juga diberikan pengetahuan mengenai inspeksi dan maintenance peralatan Gardu Induk.

——————————————————————————————————————————–

Course Overview:

Switchgear plays an important role in the safe and reliable distribution of electrical power. Failure to quickly and efficiently disconnect faults downstream in the network, or a failure within the switchgear itself is costly, resulting in loss of supply, damage to equipment and possible injury, to personnel. It is therefore important that switchgear is selected, installed, operated and maintained correctly, embracing an overall asset management regime that is both economic and effective in securing a high level of system reliability.

Course Contents:

  • Electrical Power System Overview (Substation function, Types of Subatasion)
  • MV/HV Switchgear (Switchgear Requirements, Types of Switchgear, Switchgear Standards)
  • Gas Insulated Switchgear (Gas properties, Gas Handling, Element of GIS, Gas Circuit Breaker)
  • Switchgear Components (Busbar : Simple busbar and substation layouts, Busbar configurations; Disconecting Switch, Earthing Switch, protection equipments : VT’s and CT’s, Fuses)
  • Electrical Power Transformer (Construction, principle of operation, Transformer Spesification, Transformer Conection, Cooling System)
  • Power Circuit Breaker Overview (, Purpose/ Application, Circuit Breaker Construction, Types of Circuit Breaker , Circuit Breaker Operation, Circuit Breaker Selection)
  • Main substation earthing and bonding (Purpose of Earthing, Step and touch potentials , Standards (National/IEEE/IEC), Routine testing and certification of substation earthing)
  • Switchgear Operation (Interlocked System, Rack-in/Rackout, Safety System)
  • Switchgear Protection (Protective Devices, Protective Relays, Surge protection)
  • Insulation Testing (Insulation Resistance Test, Disspation Factor Test, Withstand test
  • Switchgear Component Testing (Busbar test, Circuit breaker Test, Instrument Transformer Test, Relay Test)
  • Switchgear Maintenance (Maintenance Fundamentals, Initial test, Rutine Test, Adjustments)

Who Should Attend?
Technical personnel who are involved in the design, installation, operation and maintenance of Gas Insulated
Switchgear (GIS) and GIS Substations, such as
◊ Power System Planners
◊ Electrical Engineers
◊ Power System Managers and Technical Officers
◊ Construction and Project Managers
◊ Power System O&M Engineers
◊ Power System Consultants

 

 

ByAdmin Koma

Oil and Gas Hydrocarbon Process

Oil and Gas Hydrocarbon Process

08 Juli 2020 | 05 Agustus 2020 |02 sept 2020 | 07 Oct 2020

 

COURSE OUTLINE:

 Introduction & Pre-Test

  • Physical Properties & Chemistry of Hydrocarbon / Oil & Gas  
    • Molecular weight
    • Vapor pressure,
    • Critical properties,
    • Heat of combustion, etc)
  • Overview of Oil & Gas / Hydrocarbon Processes
    • Well fluid, Gas-Oil SeparatorUnits of Oil Processing Plant,
    • Units of Gas Processing & Conditioning, etc)
  • Production Separator & FWKO
    • 2 & 3-phase separator vertical & horizontal separator,
    • Factors affecting separation,internal & external  separator components,
    • Separator ControlRoutine Checking of Separator, etc)
  • Flash, Scrubber, and Distillation Process
    • Vapor Liquid Equilibrium (VLE) Principles,
    • Phase Behavior, Antoine Equation,
    • Fractionation Process, Tray &  bed columns, etc
  • Gas Sweetening Plant
    •  sour & sweet gas, Amine (MDEA) processes,
    • Acid Gas Pick-up, Operating Problem
    • corrosion, solution degradation, foaming),
    • Amine Reconcentration, etc)
  • Gas Dehydration Plant
    • wet & dry gas,
    • TEG Dehydration System,
    • MEG Injection, Amine Reconcentration, etc)
  • Oil Processing Plant
    • Oil-Water Emulsion, Heater Treater,
    • Emulsion Treater, Desalting,
    • Coalescers, Mercury Removal, etc
  • Low Temperature Separation of Hydrocarbon
    • chiller, refrigeration, etc
  • Plant Piping and Pipelines
    • oil pipeline, gas pipeline,
    • multiphase pipeline & flowline,
    • metal & non-metal pipe, etc)
  • Safety Aspects in Oil & Gas / Hydrocarbon Process
    • fire, explosion, BLEVE, UCVE, LFL/LEL, UFL/UEL, etc)

Image result for oil and gas hydrocarbon course objectives

  1. Post-Test & Closing

 

ByAdmin Koma

Layanan Kami

KOMA melakukan pekerjaan mengacu pada ruang lingkup yang telah direkomendasi yang tertuang dalam akta pendiriannya ref pasal 2, diantaranya adalah :

Melakukan kegiatan usaha perdagangan

Melakukan kegiatan usaha jasa & konsultan pada umumnya, terutama jasa konsultasi bidang pelatihan dan ketrampilan

Beberapa kegiatan lain yang tercakup dalam rekomendasi yang tertuang dalam akta pendiriannya adalah jasa instalasi jaringan serta maintenance computer serta konsultasi bidang pertambangan, manajemen, serta pelatihan yang berkenaan dengan kegiatan tersebut diatas.

ByAdmin Koma

About Us

Pada bidang Training and Consulting services KOMA memfokuskan bekerja sama dengan beberapa instansi pemerintah dan swasta. Oleh banyak instansi baik pemerintah maupun swasta, Koma telah dipercaya menyelenggarakan pelatihan baik secara public maupun secara inhouse.

ByAdmin Koma

KOMA Training and Consultancy (KTC)

Alamat : Komplek Cibeureum Raya A7/ 40 Bandung

|Telpon & Fax : 022 – 6071430

|E-mail : komacenter@komatraining.co.id | info@komatraining.co.id

|www.komatraining.co.id